How to Change Blade On Ryobi Miter Saw?

A miter saw is a godsend for professional woodworkers to improve their performance and save more time. High-quality miter saws with excellent functions are now available from various brands, but Ryobi is one of the most well-known with its diverse product line.  Though it may appear that changing the blade on a miter saw is a difficult task, anyone with the right expertise can accomplish it. You’ll need the necessary instructions for a proper installation. Continue reading this brief guideline on how to change blade on ryobi miter saw if you are serious.

Why Do You Need To Change The Blade On A Miter Saw?

You may want to know if changing the blade is necessary and why it is crucial before doing so. The following are some of the factors that necessitate blade replacement.

Blades get less effective

The first point to remember is that the blade cannot always perform at its best. It will lose its sharpness with time, and its performance will deteriorate. However, a new blade can provide the same performance as a new product.

Change the blade for different cuts

Not all blades are created equal. For example, some miter saw blades are designed to cut only thin wood, while others are designed to cut thick wood.

Change the blade according to material

Although a miter saw is designed to cut just wood, individuals increasingly utilize it for a wide range of purposes, including cutting metal. Cutting metal, on the other hand, necessitates a different blade than cutting wood.

How to Change Blade On Ryobi Miter Saw

Things You Need To Prepare

  • 5 and 100 mm hex key
  • Philips screwdriver
  • A good quality machine oil
  • Combination square

Step-by-step Instructions

To change the blade on a Ryobi miter saw, follow the steps below.

Step 1: Disconnect power

You must unplug the miter saw from the power source before beginning the procedure. Simply locate the power cable and disconnect it from the socket. When replacing blades, keeping the miter saw connected to the power supply might result in significant accidents.

Step 2: Release the blade guard

For the users’ protection, almost all miter saws come with a blade guard. To remove the blade from the saw, you must move the blade guard. Push the lock on the blade guard to release it. When moving it, don’t use too much force. The blade guard will gradually loosen. Remove the lock pin and maintain the guard’s upward position.

Step 3: Remove the bolt cover

The bolt cover that is attached to the blade must be moved in step 3. Rotate the blade guard carefully and gently until the Philips screw is exposed.

To release the bolt, use the Philips screw. The bolt cover is usually held in place by a screw. The hex-head blade bolt can be seen by moving the cover upward and keeping it there. Next, pull the blade out by pushing it down.

Step 4: Pull out the blade

If all of the preceding steps were completed successfully, you could now remove the blade from your miter saw. To lock the spindle, press the spindle lock button. It prevents the blade from turning. When you move the blade, it might inflict injury to your fingers if it rotates. Also, be sure you are not touching the blade’s inner side.

When removing the old blade, you can also refer to the user handbook. If the spindle cannot be secured, use a wrench to turn it. To loosen the threaded bolt, turn it right. Pull the blade from the miter saw by removing the bolt and washer. Without removing the inner bolt washer, apply some machine oil to it.

Step 5: Adjust the new blade

After you’ve completed all of the initial processes, it’s time to install a new blade. There will be arrows on each miter saw blade you purchase, and you can position the blade according to the arrows. When installing a new blade, the teeth should be facing down.

So, while you’re installing the new blade, make sure you’re following the directions. Return the outer washer and bolt if the blade is positioned properly. To tighten the bolt, turn it counter-clockwise. Push the spindle back to lock it. Fix the spindle cover and then the blade guard after tightening the bolt with a wrench.

After you’ve completed each step, connect the miter saw to the power source and make sure the blade is spinning freely, and the miter saw is operational. It will definitely work if you have installed the blade correctly.

See also:

Safe Tips For Changing Of Ryobi Miter Saw Blade

To stay safe when replacing an outdated blade, keep these tips in mind.

  • Only use the manufacturer’s suggested blades.
  • As directed in the user handbook, select the appropriate blade size and number of teeth.
  • Applying too much pressure when tightening the screws and nuts may cause them to break.
  • The blade you choose shouldn’t be too thick because it won’t fit in the Ryobi miter saw.
  • Don’t go against the user manual’s instructions.
  • Make sure the blade is square to the table, and the fence is square to the blade to get accurate, precise cuts.
  • Make sure the screws and bolts aren’t overtightened. It may cause cross-threading harm, which is an important error to fix.
  • Installing a blade that is too thick for the saw is not a good idea. If the washer won’t engage the flats on the spindle, it’s because the blade is too thick for the saw.
  • For miter saw blade replacement, consult the owner’s handbook for your miter saw. If you lose your manual, simply Google your saw’s brand name and model number. It can be found on the internet.

Conclusion

You now know how to change blade on ryobi miter saw in detail. Even though the process appears to be lengthy, it will be completed in a short period. This would be simple, especially if you used the proper blade-changing tools. If you’re having trouble, seek advice from a professional.