If you have been finding out about table saws for long enough, you must have heard the name of DeWalt. This is a big brand in the field of manufacturing quality mechanic tools with numerous products trusted and used all over the world.
Are you going to buy a great table saw for yourself? Read this review of the best DeWalt table saws first. I promise it will not waste your time!
Things To Consider When Buying
Most people will want their table saw to be lightweight and compact enough to move to different places to use or store. Also, if your workshop is not very wide, a big model would take up too much space.
Therefore, we always advise you to take a look at the dimensions and weights of products before deciding to buy one. Besides, you may also want to reduce the number of extra tools by buying cordless table saws or those integrated with features of some other appliances.
Rip capacity is a familiar term referring to the dimensions of the workpiece that the table saw can cut. And it goes without saying that larger models are able to handle bigger wood pieces.
Depending on your projects (e.g., remodeling your house, making furniture, fences, wooden items, so on), consider the size of your target before making the purchase.
Motor Power and Drive Type
It is common sense that you need a robust motor to cut through tough objects efficiently like chopping butter with a knife.
On average, a portable table saw would be equipped with a 15-amp motor. Nevertheless, if tackling hard logs with stationary saws is your case, your device’s motor should be able to reach the power of 3HP to 5HP. Vice versa, a 5-amp motor is enough for cutting small wood pieces.
Whatsoever, your machine had better offer the minimum no-load rate of 3,000 RPM. Or else, there will be hardly sufficient power to create fine, smooth cuts with minimal vibration.
Commonly, table saws feature one of two kinds of drive/motor combinations as below:
- Direct-drive saws typically come with a universal motor directly linked to the saw blade and delivering all of the horsepowers to it. This type of motor is often found on mobile models because of its compact size. However, they are strong yet extremely noisy.
- Belt-drive saws usually have a belt and an induction motor to convey energy to the saw blade. Their motor may be offset to stay away from the sawdust and thus can last longer.
Induction motors are less noisy and can cut denser materials, but they require more frequent maintenance. Users would have to check their parts for wear and appropriate tension regularly.
The table size is proportional to its stability and the size of the wood pieces that you can work with. And this also means that it directly relates to the rip capacity of your table saw.
Hence, pick a model that has a wide enough table, and it is also common to see table saws that come with an extension.
The splitter, riving knife, and anti-kickback pawls are great components to prevent the materials from kicking back and causing serious accidents to saw operators.
However, a splitter is far inferior to a riving knife and anti-kickback pawls. Moreover, a riving knife can also be easily removed and replaced if necessary.
- Push Stick
A push block or a push stick will help you maneuver the workpieces on the table without having your hands near the rotating saw blade. As such, your hands will never be cut!
- Blade Guard
The blade guard will shield you from anything that can shoot at you, including the blade, debris, dust, and material kickback.
An overhead blade guard can be combined with a riving knife to optimize the protection performance.
- Magnetic switch
A magnetic switch comes in handy whenever a power outage happens. This tiny item will switch off the power and protect it from being overload. And when the power returns, the machine will turn on again.
Smart models may come with a sensor that automatically ceases the rotating saw blade instantly should your skin contact with it. This a fantastic feature, but you should still be cautious.
The 5 Best DeWalt Table Saws Review 2020
Like the DEWALT DWE7491X, the DEWALT DWE7485 features a rack and pinion fence system with telescoping rails so that users can make fence adjustments smoothly, quickly, and accurately.
Similarly, it also has built-in storage space for blade guard assembly, miter gauge, anti-kickback pawls, non-through cut riving knife, push stick, and blade change wrenches.
Be aware that all the anti-kickback pawls, push stick, non-thru cut riving knife, and modular guard system are included in the box. Therefore, you will not have to buy any safety equipment separately.
Owing to the amazing 24.5-inch ripping capacity, you can perform a variety of cuts on OSB sheets or 4×8 plywoods. In spite of being a little less powerful than the DEWALT DWE7491X, this machine’s 15 amp motor can still reach 5800 RPM.
However, its 8.25-inch saw blade counts 24 teeth, which is more suitable for making delicate cuts on smaller wood pieces instead of huge lumbers.
Note: It delivers great precision, performance, and has a lot of safety features plus a built-in storage system.
- Full of safety features
- High precision
- Built-in storage system
- Decent performance
- A bit tricky to assemble
The DEWALT DWE7491X is one of the most ergonomic models of DeWalt yet offers an incredibly high rip capacity of up to 32.5 inches. Moreover, its superb rack and pinion fence also ensures higher accuracy and stability.
Besides, there is a whole onboard storage system where you can store the blade guard assembly, riving knife, fence, miter gauge, push stick, wrenches, cord wrap, and many more conveniently.
The machine has a 2.5-inch dust collection port to keep your workplace clean. You can connect a vacuum to this port where all the dust coming from the wood will be gathered.
Plus, making all adjustments is just a breeze. Without any extra tools, you can adjust the guarding components, the fence system, as well as set up/fold down the scissor stand within seconds.
About performance, the 15-amp motor will drive the 10-inch 24-tooth carbide saw blade to cut wood as deep as 3.125 inches at 90 degrees and 2.25 inches at 45 degrees.
Note: It is highly accurate and stable, easy to use with a robust motor and an onboard storage system.
- High stability and accuracy
- Onboard storage system
- Robust motor
- Easy to use
- Noisy operation
DEWALT FLEXVOLT DCS7485T1
The DeWalt FlexVolt DCS7485T1 boasts the top-notch ratio of power to weight. At a modest size, it still delivers sufficient features of a DeWalt’s full-sized saw.
Indeed, it comes with an adjustable rack and pinion fence fitted with swing arm to support big materials, integrated dust collector adapters, table coating, and onboard storage for the riving knife, blade guard, miter gauge, wrenches, and fence.
Furthermore, this battery-powered table saw even comprises of things that not all corded models have. For example, beneath the blade is the dust collection shroud that pulls dust towards the dust collector. Additionally, there is a brushless motor, Power Loss Reset, and large rubber feet for a firm stand.
The 8.25-inch blade features a slim kerf and rotates at the no-load rate of up to 5.800 RPM. As we tested on two oak planks, it could penetrate the depth of 1.75 inches at 45 degrees and 2.5 inches at 90 degrees. Meanwhile, the 0.625-inch arbor with the unique FlexVolt design enhances the effectiveness of the cordless model.
The 12-inch rip capacity to the left and 24-inch rip capacity to the right is not bad for the humble profile of the DEWALT FLEXVOLT DCS7485T1.
Note: Its power-to-weight ratio is fabulous. Despite the small size, it has multiple features of full-sized models and high no-load speed.
- Great power-to-weight ratio
- Excellent no-load speed
- Slim kerf
- Come with multiple features of full-sized models
- Have no AC adapter
As you can see in the product picture, the DeWalt DW745 is a mini table saw that can fulfill light-duty projects satisfactorily.
It is amazingly lightweight at the weight of 48 pounds and with an optimal footprint. Even a woman can move it without too much effort.
However, you are wrong if you underestimate its capability. This tiny machine can still deliver a 24-inch ripping capacity, which is sufficient to tackle big woods.
Besides, its 15 amp motor has a no-load speed of 3850 rpm and can reach the max rate of 4800 rpm to slice hardwoods at ease.
The rack and pinion fence of the DW745 comes with many upgrades. Most notably, it has an easy-to-adjust lock and a geared mechanism to extend the rail.
Other familiar safety features are the transparent blade guard, the anti-kickback mechanism holding the materials, and a high-quality push stick.
Note: Within this tiny table saw, there are sufficient safety features, an advanced rip fence system, and decent motor power.
- The advanced rip fence system
- Compact design
- Decent motor power
- There are enough safety features
- Not as strong as bigger models
The DeWalt DWE7480 is an excellent tool for those who often work at in-home workshops or on job sites where the bench space available is negligible.
Despite that, this machine still owns a sturdy motor, solid construction, and higher performance in comparison with the majority of products in the same segment.
We have never seen anyone complain about the ability of this table saw even when cutting hard materials such as maple, red oak, or composites.
Like other DeWalt’s models above, the rip fence of this one is also a highlight. It functions as an extension part of the table and is installed on a mechanical runner fitted with multiple plastic teeth.
In addition, the aluminum dust port features a standard 2.5-inch hose outlet that can be connected to a vacuum or dust bag to eliminate dust build-up effectively.
Note: This well-constructed machine is space-saving, easy to use, clean, and maintain. It is versatile enough to work well for most general works.
- Work well for general works
- Easy to use, clean, and maintain
- No dado blade support
1. What is a TEFC motor?
T.E.F.C is the acronym of the term “Totally Enclosed Fan Cooled”. It is mandatory that a motor is safeguarded from contamination, debris, and other harmful external impacts.
A T.E.F.C. motor is engineered to be sealed and fan-cooled so that it can be safe from all outer factors as well as constantly keep the machine running at a lower temperature.
Therefore, a T.E.F.C motor is typically more durable, reliable, and higher-performance than a standard motor.
2. How to tweak a table saw? How long does it take to complete the process?
Based on the number of components a model has and its complexity, you may need around 1 to 3 hours to set up and configure a table saw fully. Meanwhile, installing extra accessories might also take up from 30 to 60 minutes with the right supportive tools.
However, the total amount of time depends on your skills and experience with the equipment, too. If you are a newbie, the whole process may cost you twice as long as the duration an expert needs.
3. Which side of a table saw should its fence be on?
The answer to this question depends on your dominant hand. In other words, if you are left-handed, the fence ought to be on the left of the table. And vice versa, if you are right-handed, it had better be on the right side of the saw.
In this way, you are able to control and use the fence more easily and comfortably with your dominant hand.
4. Where to buy DeWalt table saws?
DeWalt table saws are sold widely in many mechanical stores all over the world, so if you are lucky, you may find some at your local shops. Or else, you can make online orders conveniently at the following websites:
- Dewalt’s official site
- Few other stores
Above are trusted sites recommended by the manufacturer and customers. Apart from these, you can find other vendors sell DeWalt table saws as well.
Yeah, that’s all. We have introduced to you the top 5 best DeWalt table saws, a comprehensive buying guide, and detailed answers for FAQs. Let’s make the most out of them to pick the most suitable choice for yourself.
Now, thanks for reading!